Chemical Sand Consolidation as an Effective Alternative to Conventional Sand Control Methods in Ecuador

Resumen

Abstract This paper shows the results from chemical sand consolidation treatments used in the M1 sandstone as the main sand control method. For a successful implementation of this technique a workflow that combines field data, temperature modeling, laboratory analysis, petrophysics and geomechanics has been developed. Production results reports zero to near zero sand production with almost no impact on well productivity. Pre job design steps used to secure a consolidated reservoir after the treatment are described. Temperature is a key parameter to model since the resin is temperature activated. Laboratory tests and simulated temperature defines the curing time. A step rate test is used to calculate the injectivity index and evaluate the need for an acid stimulation treatment before the consolidation system is pumped into the well. This test is repeated after curing time to evaluate any possible impact on productivity. Determination of the Unconfined Compressive Strength (UCS) of the consolidation sand and critical sand production rate are also included in the analysis to understand sand production potential in the field. Chemical sand consolidation consists of two main components, resin and hardener. The consolidation fluid along with a pre-flush and an over-flush have typically been pumped into the well using production tubing. This sand control method has been proven to be relatively low in cost compared to other sand control techniques and the treatment can be performed in a relatively short period of time. These two characteristics and the positive production results observed thus far makes this technique attractive for upcoming sand control completions with unconsolidated reservoirs with similar characteristics to the M1 sandstone. In addition, conventional sand control methods rely on a particle size distribution (PSD) from a representative core sample for a successful implementation whereas chemical sand consolidation system is PDS independent.